U-Slot Spiral End Mill

1.Material: tungsten steel/tungsten carbide
2.HCR:58°
3. Customizable
4. Coating:bright
5. Fully ground cutting edge for sharp cutting
6.3 chip removal grooves for smooth chip removal
7. Universal chamfered round handle
8. Applicable to: aluminum alloy, copper, plastic, plastic and other soft materials

Product Detail

Large cutting U-shaped groove design, focusing on cutting and sharp design, using 0.6 grain imported WC powder, When the material encounters external erosion, an anti-corrosion protective layer forms on the surface to resist corrosion and greatly improve the service life of the tool.which is compatible with toughness and wear resistance。

HRC58°U-Slot Spiral End Mill model specifications table:

d1=Flute Diameter d2=Shank Diameter L1=Overall Length L2=Flute Length

specifications	Flute Diameter(mm)	Flute Length(mm)	Shank Diameter(mm)	Overall Length(mm)
D13D4*50L	1	3	4	50
D1.54.5D4*50L	1.5	4.5	4	50
D26D4*50L	2	6	4	50
D2.57.5D4*50L	2.5	7.5	4	50
D39D4*50L	3	9	4	50
D412D4*50L	4	12	4	50
D416D4*75L	4	16	4	50
D420D4*100L	4	20	4	100
D515D6*50L	5	15	6	50
D618D6*50L	6	18	6	50
D624D6*75L	6	24	6	75
D630D6*100L	6	30	6	100
D645D6*150L	6	46	6	150
D824D8*60L	8	24	8	60
D830D8*75L	8	30	8	75
D835D8*100L	8	35	8	100
D850D8*150L	8	50	8	150
D1030D10*75L	10	30	10	75
D1045D10*100L	10	45	10	100
D1060D10*150L	10	60	10	150
D1235D12*75L	12	35	12	75
D1245D12*100L	12	45	12	100
D1260D12*150L	12	60	12	150
D1445D14*100L	14	45	14	100
D1475D14*150L	14	75	14	150
D1645D16*100L	16	45	16	100
D1675D16*150L	16	75	16	150
D2045D20*100L	20	45	20	100